BLUEGRASS SPEEDWAY

2010 LATE MODEL RULES

or Body Rules Apply

Steel Block Motors - 2200 lbs

Aluminum Block Motors - 2300 lbs.

Tire Rule 
Front & Rear -
Hoosier – LM20, 1300, LM40, 1600 & D55 (Shoulder Plated)

Soft Compounds (LM20, 1300) Must Durometer 40 Prior

Hard Compounds (LM40, 1600, D55) Must Durometer 60 Prior

SUPR or SAS branded Hoosier 1600 is not eligible for competition.

Largest permitted tire is twenty-nine inches (29”) by eleven inches (11”) by fifteen inches (15”).
Maximum circumference permitted is ninety-three inches (93”).
Maximum cross section width permitted is sixteen and three-quarters inches (16 ¾”).
Hoops for inspection must pass over tire freely.
No tire softeners or conditioner

RULEBOOK DISCLAIMER: The rules set forth herein are designed to provide for the orderly conduct of racing events and to establish minimum acceptable requirements of such events. These rules shall govern the condition of all events, and by participating in these events all participants are deemed to have complied with these rules. NO EXPRESSED OR IMPLIED WARRANTY OR SAFETY SHALL RESULT FROM PUBLICATIONS OF OR COMPLIANCE WITH THESE RULES. They are intended as a guide for the conduct of the sport and are in no way guaranteed against injury of death to a participant, spectator or official.

The race director shall be empowered to permit reasonable and appropriate deviations from any of the specifications herein or impose and further the restrictions that in his opinion do not alter the minimum acceptable requirements. NO EXPRESSED OR IMPLIED WARRANTY OF SAFETY SHALL RESULT FROM SUCH ALTERATION OF SPECIFICATIONS. Any interpretation or deviation of these rules is left to the discretion of the officials. THEIR DECISION IS FINAL.